Comtest-networks 4192 POTS/ISDN Splitter Shelf Manuel d'utilisateur télécharger pdf

Rev 2-6 Sept. 2008 Page 1 of 6

Mounting Bracket

Mounting Hardware

Model 4192 POTS/ISDN Splitter Shelf Installation Guide

Comtest Networks Inc.

This guide provides the basic information required to install the Comtest Model 4192 POTS/ISDN Splitter Shelf on

a 19 or 23 inch rack assembly.

Unpacking the 4192 shelf

Before opening the 4192 shipping box, carefully inspect for any signs of damage. If the box has been damaged,

note the damage before opening the box. Open the box and remove the 4192 shelf and carefully examine it for

any damage. If the shelf is damaged, contact your supplier for instructions to return it for a replacement. If there is

no damage, verify that all packed items have been received. You should

receive the following:

• Comtest model 4192 shelf, part number SA-4192-7401

• Quantity 1 Rack Mounting Bracket Kit, part number: SA-4192-7417

o Quantity 2 Rack Mounting Brackets, part number SA-4192-7405

• Quantity 1 Cable Tie Kit, part number: SA-4192-7419

o Quantity 24, 8” nylon cable tie wraps, part number HW-CTS0-080N

o Mounting hardware kit, part number: SA-0000-0001, consisting of:

 Quantity 4, 10-32 x 3/8 screws, part number HW-PP06-05SS

 Quantity 4, #10 external tooth lock washers, part number HW-

WE06-00SS

If any of the above items are missing, please contact your supplier.

Installation

The 4192 requires 4U (7.00 inches) of rack space. The shelf is supplied with mounting brackets and hardware to

allow installation in a 19 inch or 23 inch rack.

Preparation for Mounting

• 19 Inch Mounting:

For 19 inch mounting, the long side of the mounting bracket

is attached to the side of the shelf. There are three

positions to mount the bracket on the shelf and four

positions on the mounting bracket. The Rack Mounting

Bracket can also be mounted with the flange at the back.

Thus, there are 24 possible mounting positions for the Rack

Mounting Bracket. Choose a suitable mounting position for

the shelf then, using the provided 10-32 screws and lock

washers, attach the bracket to each side of the shelf. Place

the shelf in position on the rack and, using the appropriate screws

and lock washers, attach the shelf to the rack. Please note the hardware (screws) required to mount the shelf

to the rack is not supplied with the 4192 shelf mounting kit.

1 2 3 4 5 6

Résumé du contenu

Page 1 - Comtest Networks Inc

Page 2 - New Installations

Rev 2-6 Sept. 2008 Page 2 of 6 DSL Cable LOOP CablePSTN Cable Mounting Bracket Add if using .425” screws23 Inch Mounting For 23 inch mounting, the

Page 3 - Connector Pin Outs

Rev 2-6 Sept. 2008 Page 3 of 6 Install the cables in the following sequence: • Connect DSL Cable first Insert the screw through the connector cove

Page 4 - Installing Splitter Cards

Rev 2-6 Sept. 2008 Page 4 of 6 Front PanelSplitter Cards Existing Installations Please note that the Comtest Model 4192 shelf ships with DSL, LOOP

Page 5

Rev 2-6 Sept. 2008 Page 5 of 6 Grounding For safety reasons, the 4192 needs to be grounded to the rack through a ground terminal located on the ri

Page 6 - Page 6 of 6

Rev 2-6 Sept. 2008 Page 6 of 6 Model 4192 POTS/ISDN Splitter Shelf Shipping Carton Contents QTY Checked 1. 4192 Shelf Assembly [SA-4192-7400]

Commentaires sur ces manuels

Pas de commentaire

Comtest-networks 4192 POTS/ISDN Splitter Shelf Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Communication Comtest-networks 4192 POTS/ISDN Splitter Shelf. Comtest Networks 4192 POTS/ISDN Splitter Shelf User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Communication Comtest-networks 4192 POTS/ISDN Splitter Shelf